Print PDF
Favorite
Email
Step 8Attach Metal Shield with LED
Now we want to put our Metal shield back in it was at this point that I soldered the wire to the other LED lead, which I later realized made it more difficult, that's why I told you to do it earlier.
Your switch should now make contact with the bent piece of the shield and you should have wires sticking out of the bottom of your cut off lighter body
Your switch should now make contact with the bent piece of the shield and you should have wires sticking out of the bottom of your cut off lighter body
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
