With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I wanted some LEDs for my dome lights in my 2000 Dodge Dakota, and knew that Putco sold Vehicle Specific Dome Light Kits but not for my truck. I decid...
First thing I needed to do was measure the available area for the LEDÂ Panel. For this application, it happened to be 1.25" x 2.25". Note:These bu...
Like I said, I got them from StylinTrucks.com
Putco will include a few adapters, you'll need the one with the 194 connector. Each of the bulbs have the same connector on the other end to plug i...
Plug the male and female connectors together.
After cleaning the dome light (I used rubbing alcohol since it dries fast), take the red backing off of the LED Light Panel and then tape it to the Do...
Close it and you are good. You don't need to take it all the way out like I did, but if you did, reinstall it!
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »