Print PDF
Favorite
Email
Step 4Sewing the Circuit - Part Two
3. Gently slip the leads of the LED through the pierced holes to the back of the felt.
4. Using needle nose pliers, curl the negative LED lead (the shorter one) into a loop. This will make it easier for you to sew the LED onto the felt. Mark it with a black marker to help you distinguish the negative lead from the positive.
5. Repeat for the positive lead. Dont mark the positive lead with a marker.
4. Using needle nose pliers, curl the negative LED lead (the shorter one) into a loop. This will make it easier for you to sew the LED onto the felt. Mark it with a black marker to help you distinguish the negative lead from the positive.
5. Repeat for the positive lead. Dont mark the positive lead with a marker.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
