Print PDF
Favorite
Email
Step 7Sewing the Circuit - Part Five
10. Using another piece of conductive thread, loop the thread several times around the battery slit that has not yet been sewn. This will be the positive contact for the battery.
11. Using the same thread, continue sewing a path toward the male snap, leaving a 1/4 gap between the two paths.
12. Grab the female end of the snap. Leaving 1 of loose thread, secure the snap to the end of the conductive thread. The female snap should not be sewn onto the felt. The snap will function as the switch.
11. Using the same thread, continue sewing a path toward the male snap, leaving a 1/4 gap between the two paths.
12. Grab the female end of the snap. Leaving 1 of loose thread, secure the snap to the end of the conductive thread. The female snap should not be sewn onto the felt. The snap will function as the switch.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
