Instructables

LED FLASHLIGHT MADE OF A MATCH-BOX

LEARN HOW TO BUILD IN LESS THAN 5 MINUTES A LED FLASHLIGHT USING A MATCH-BOX.

 
Remove these adsRemove these ads by Signing Up

Step 1: Stuff you will need

Picture of Stuff you will need
Picture 5.png
Picture 9.png
Picture 6.png
Picture 8.png
Picture 7.png
2 LED LIGHTS
1 MATCH-BOX
1 BATTERY (3 VOLTS)
1 PEN
1 SCISSOR
SCOTCH TAPE

Step 2: MATCH-BOX CLEANING

Picture of MATCH-BOX CLEANING
Picture 11.png
START BY TAKING THE MATCHES FROM THE CARD PAPER (BOX)

Step 3: DRAW THE POINTS FOR THE LEDS

Picture of DRAW THE POINTS FOR THE LEDS
USING THE PEN DRAW TWO POINTS IN THE CARD PAPER WHERE IT FOLDS.

Step 4: PIERCE AND PLACE

Picture of PIERCE AND PLACE
Picture 16.png
WITH THE SCISSOR PIERCE THE 2 POINTS.
EACH PLACE IS WHERE THE LEDS WILL BE PLACED.

Step 5: INSERT THE LEDS

Picture of INSERT THE LEDS
Picture 14.png
Picture 16.png
Picture 18.png
NOW CUT A SMALL PIECE OF SCOTCH TAPE.
PLACE THE EACH LED IN EACH HOLE. PLACE THE SMALL PIECE OF SCOTCH TAPE OVER THE LEDS LEGS.

Step 6: THE BATERY

Picture of THE BATERY
Picture 20.png
Picture 21.png
WITH THE TWO LED LEGS ALREADY TAPED PLACE THE BATTERY ON TOP WITH SOME SCOTCH TAPE. YOU SHOULD TEST THE LOOSE LED LEGS OVER THE BATTERY TO SEE IF EVERYTHING IS WORKING.

Step 7: CLOSING TIME

Picture of CLOSING TIME
Picture 27.png
WRAP SOME SCOTCH TAPE SO YOU CAN CLOSE THE MATCH-BOX.

Step 8: READY TO LIGHT

Picture of READY TO LIGHT
Picture 2.png
NOW ENJOY YOUR 5 MINUTES LED FLASHLIGHT MADE FROM A MATCH-BOX.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!