Print PDF
Favorite
Email
Step 11Attach the batteries.
I used PVC tape to attach the wires to the batteries, this is so the can be easily be replaced.
Then use the tak to hold all the wires in place & the Fibre Optic cable. for a more permanent fix you could use something like Milliput.
Place the batteries on top of the wires, then re-assemble, found that some Tak around the rivet stalks held on the body.
Then use the tak to hold all the wires in place & the Fibre Optic cable. for a more permanent fix you could use something like Milliput.
Place the batteries on top of the wires, then re-assemble, found that some Tak around the rivet stalks held on the body.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
