Print PDF
Favorite
Email
Step 8Add the Fibre Optic cable.
This step is very tricky, try to bend the cable into the holes for the lights, I found that wiggling the cable to create some heat whilst bending worked well, but be careful because this cable can break very easily. Leave some cable protruding out from the lights, this can be trimmed later.
When you have the adequate shape & sizes of cable wrap them into the LED's as tightly as you can, so no light escapes.
When you have the adequate shape & sizes of cable wrap them into the LED's as tightly as you can, so no light escapes.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
