Once you've wired in the lights to the USB plug you can plug it in to your computer then tuck the LED lights into the base of the tiki. The ShapeLock...
Step 2: Mold tiki
Take your Amazing Mold Putty and mix enough of each color (follow mixing instructions in the box) so that 75% of the tiki is covered by the putty. I had to put this is in a clear plastic box to add some sturdines. If you don't have a clear plastic box to contain the putty then don't worry it should work without it.
Once the putty sets up - then remove your tiki from the mold.