Print PDF
Favorite
Email
Step 3Circuit Board
Update: Board files and code are available here https://github.com/szczys/LED-menorah
As I said in the last step, you can either etch your own board, or use perf board.
I have pictures of the etched board as well as the Eagle CAD pictures of the artwork and layout. I used one jumper (seen in red on the second picture) wire. I could have avoided this and gone with a completely one-sided board but it would have meant running a trace in between pads of and LED. For ease of the etching process I decided one jumper was best.
In case you're wondering, I use the toner transfer method with cupric chloride as my etchant.
As I said in the last step, you can either etch your own board, or use perf board.
I have pictures of the etched board as well as the Eagle CAD pictures of the artwork and layout. I used one jumper (seen in red on the second picture) wire. I could have avoided this and gone with a completely one-sided board but it would have meant running a trace in between pads of and LED. For ease of the etching process I decided one jumper was best.
In case you're wondering, I use the toner transfer method with cupric chloride as my etchant.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Apr 12, 2009. 3:18 AMLastDevil
says:
May i just say that i have only just started on electronic and you have or anybody that knows how to create a pcb are very skilled i just can't get my head round it yet i might do in a few years ;-)
Reply
 |
Add Comment
|
