Print PDF
Favorite
Email
Step 6Conclusion
In order to display the menorah in an upright position I attached a KK connector to the wires coming from my battery pack. I used a rubber-band to hold this in place on the back of the battery pack and then plugged the pin header from the menorah into the KK connector.
It is important to connect the battery with the proper polarity or you will damage the processor. The positive lead needs to be connected to the pin with the trace leading away from it. The negative lead connects to the pin that is soldered to the ground plane (large area of copper).
It is important to connect the battery with the proper polarity or you will damage the processor. The positive lead needs to be connected to the pin with the trace leading away from it. The negative lead connects to the pin that is soldered to the ground plane (large area of copper).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
