Print PDF
Favorite
Email
Step 2Solder the Display
For the first step, you need to solder wires to the display. You will also need to solder one switch from the dip switch between the two colours' cathodes for each row. To make it clearer I have attached a schematic of the display in the pictures (click the [i] on the picture to get the full sized version).
For the next step I used switch 8 for a 'travel mode'. This is so the hat isn't accidentally turned on in a bag and drained.
For the next step I used switch 8 for a 'travel mode'. This is so the hat isn't accidentally turned on in a bag and drained.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
