Step 2: Remove the broken battery holder
-Remove the tape and take note of how it is taped up. (save if you wish to reuse)
-Take note of polarity (+/-)
-Cut the leads or de-solder if you have a solder gun available. If you are cutting the leads take note of how much wire length you have available before you make the cut because you will need room to restrip the ends of the leads.
-Take note of polarity (+/-)
-Cut the leads or de-solder if you have a solder gun available. If you are cutting the leads take note of how much wire length you have available before you make the cut because you will need room to restrip the ends of the leads.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
