Print PDF
Favorite
Email
Step 2Drill LED Holes
The hoop shown in the intro pictures had 3 LED's facing outwards, and 3 more LED's facing upwards to sorta "highlight" the hooper. Plan out your configuration and mark the hoop before drilling! I used a 1/4" drill bit, and drilled completely through the tube (you'll see why later).
Once you've drilled your holes, run a pair of copper wires through the length of your tube, leaving about 2 feet of extra length. I used a twisted pair scavenged from some old ethernet cables for this.
Once you've drilled your holes, run a pair of copper wires through the length of your tube, leaving about 2 feet of extra length. I used a twisted pair scavenged from some old ethernet cables for this.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
