Print PDF
Favorite
Email
Step 4Sew and Glue Body
Place your batting, centered, on top of the 2 pieces of fabric. Fold the fabric over the batting and pin.
With a needle and thread, sew through your layers of fabric and batting ~ 1/4" from the edge of your overlap. Be careful not to do any back stitching. When you are finished, pull the thread to gather the fabric and make a scrunchy jellyfish shape (do not knot/tie off just yet).
Place your Jelly Body over the top of the plastic bubble. If you need to, adjust the gather so that it is snug and tie a knot to finish it. Glue the fabric to the plastic bubble, covering the tops of the ribbon tentacles. Again, make sure not to overlap the bottom - leave ~1/4" of space to work with.
Congratulations, your Jelly is almost finished! Now on to the Throwies...
With a needle and thread, sew through your layers of fabric and batting ~ 1/4" from the edge of your overlap. Be careful not to do any back stitching. When you are finished, pull the thread to gather the fabric and make a scrunchy jellyfish shape (do not knot/tie off just yet).
Place your Jelly Body over the top of the plastic bubble. If you need to, adjust the gather so that it is snug and tie a knot to finish it. Glue the fabric to the plastic bubble, covering the tops of the ribbon tentacles. Again, make sure not to overlap the bottom - leave ~1/4" of space to work with.
Congratulations, your Jelly is almost finished! Now on to the Throwies...
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
