3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

LED Lightbulb

Step 2Assembly

assembly
You need to start by cleaning out the lightbulb, there are numerous instructables with this step and I will forgo it here.

The circuit consists of two LED's wired in opposition, I ground down the LED's just short of the die and glued them together to make a single double LED. Twist the legs of the LED's together, on one side solder the capacitor, the other the resistor. Simple.


« Previous StepDownload PDFView All StepsNext Step »
11 comments
Jul 16, 2010. 11:27 PMnoingwhat says:
Is it really necessary to wire two LEDs in opposition? Is the flicker noticable if you didn't?
Aug 27, 2010. 7:28 PMmegapix says:
Yes, its necessary, but not because of flicker. LED's have a "reverse breakdown voltage" of only about 5 volts, so a single LED would break down as soon as the line voltage reversed direction. Although the capacitor and resistor might prevent instantaneous destruction, the LED lifetime would likely be reduced. By putting a second LED across the first LED, with opposite polarity, the two LED's protect each other from high reverse voltage, and double the light output, and reduce flicker. What a deal!
Aug 14, 2010. 11:17 PMbrando112186 says:
(removed by author or community request)
Aug 14, 2010. 11:28 PMbrando112186 says:
(removed by author or community request)
Aug 15, 2010. 2:59 PMnoingwhat says:
Ah yes, I forgot about that. Thanks!
Jun 14, 2010. 3:07 PMw0rm5 says:
Hi, nice one, but what about the capacitor plarity, how do I hook it, negative side to led or the oether way? Thanks
Mar 16, 2010. 7:47 PMtaikombuter says:
I'm a new member ! So, i need you explain more to connect 2 led together.
You can post 1 picture of wiring diagram. Thanks !
Sep 28, 2009. 5:26 PMensoarts says:
Wired in opposition? ie positive to postive ? please clarify this point for the clueless. thanks :)
Aug 5, 2009. 2:54 PMH3xx says:
Just a quick side comment, I can understand not wanting to "recreate the wheel" for cleaning out the bulb but a quick link to one of these other instructables would be more convenient for the reader. Other than that, this looks very interesting. I'm definitely trying this. I might replace every bulb in the house. ;)

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
258
Followers
68
Author:Tool Using Animal
I'm a graduate of the University of Central Florida with a degree in Mechanical Engineering, I am currently working on my Master's. Otherwise, I enjoy building things, designing the things I'm going ...
more »