##### This intructable is work in progress I am open to any feedback in the interim ######################
About a year ago (fall 2015) I was looking to upgrade my home computer. I have been doing a lot of photography and some home video editing and I really needed an upgrade, and then it daunt on me. I have no workspace to place a computer on. Furthermore, I realized that I have an pretty open floor plan and no real counter space to put the mail and I could really use some additional storage. Most of the time, my mail tended to clutter the corner of my kitchen counters. That is when the plan was created to build a new bookcase.
This intructable covers my thought process into how this project was designed and executed. I write all of this in retrospect, so this won't be a complete step by step tutorial. But since this bookcase was highly customized to the space available to me, I assume the objective here is to create ideas and give pointers on how to build an LED lit bookcase for any situation. In fact, if I had to do it again I would do a few things different. I actually list a summary of those "lessons learned" in the final section of this intractable.
In the next section I start with listing some links with designs I used for my project. After I will provide a part list for each component of the bookcase. In my option, this bookcase consists of 4 more or less separate parts:
- The base cabinets and base boards
- The butcher-block countertop
- The shelving on top of the countertop + crown moulding
- The LED strip lighting + power + controllers
Each of these components are covered in separate sections.
Finally I will show some images of the final product and list some of the lessons learned. during the whole process.
Step 1: Background
I never build a bookcase before and had to start by googling up some ideas. I quickly came upton a design a really liked at Remodelaholic titled "Build A Wall-to-Wall Built-In Desk and Bookcase" by Cassity.
I also really liked a design shown on Custommade.com by J&S woodworking
One of the things I liked most about some of the bookshelves I saw was the build in lighting. I have some experience working with LEDs (making a wearable project for my daughter) and thought it would be fun to use LED strips to light up each shelf.
Based on the ideas I saw on Pinterest I started my design, which will be presented in the next step.
Step 2: Design
I started making a rough sketch of the bookcase. Here is where a couple of big decisions need to be made. For instance, the hight of the countertop needs to be specified. I chose to have a higher desk space so I could work while standing (I sit enough at work). This allowed for the use of regular kitchen base cabinets to be use. I also space out a few butcher blocks to be used as countertops. It became clear early on that butcher block of the size I wanted where either not available or had to be custom made at a high price. Bobbie, my father in law promised me he could make one from base materials. I decided that I did not want the crown moulding to reach the ceiling but rather leave a 5 in. gap that could be lit up.
Step 3: Materials
(1) Oak base cabinets
- 18x34.5x24 in. Base Cabinet with 3-Drawers in Unfinished Oak (2 x $137)
- 15x34.5x24 in. Base Cabinet in Unfinished Oak (2 x $79)
- 23.5x34.5x0.125 in. End Panel in Unfinished Oak (3 x $11.98)
- White paint plus primer (1 gal ~$45)
- Baseboard 18 ft ($17.04 x 2)
- Sandpaper (100 and 220)
- Lumber: African Mahogany (3 in thick, I needed 75 board feet, $400)
- Minwax 32-fl oz Rustic Mahogony Oil-Based Interior Stain ($15.76)
- Minwax Fast-Drying Polyurethane Satin Base 32 fl oz Polyurethane ($10.77)
- Orbital sander
- San paper (100, 220)
- Wood glue
- Table saw
- I decided to make my butcher block countertop from scratch. You can buy ones pre made but you will spend quit a bit more, for instance here or here. Expect to pay in excess of $2,000 that for an 11 foot long, 25 in. wide 3 in. thick countertop. One can decide a different thickness or material off-course.
- Oak plywood
- Crown Moulding
- Need more info here...
(4) LED lighting + power + controllers
- 5M Warm White 5630 SMD Non-waterproof 300 LEDs Strip light 12V (x3, $8.62)
- 5M White White 5630 SMD Non-waterproof 300 LEDs Strip light 12V (x3, $8.62)
- LED Touch Controller Two Color Temperature Controller For LED Strip (2x $14.55)
- 12V 10A 120W Switching Power Supply Convert Adaptor For CCTV Camera (2x 15.38)
- Soldering iron
- Wire strippers/cutters
- 4 strand wire
Step 4: Base Cabinets
Step 5: Countertop
Step 6: Shelves
describe how the shelves we made need more info from bobby
Step 7: Solder LED Strips
Show instructables with LED strip
List all the parts required for the LED strip
Step 8: Final Result
Step 9: Lessons Learned
What would I do different.
Embed LED from the beginning
Controllers are not ideal.
Better use remote or control from phone.
I seldom use the high temperature white, I think I could have used a single LED strip, or a single RGB strip with a single controller.