Print PDF
Favorite
Email
Step 2Cutting the backside
The brown backside of the photo frame is (as always) a nice rectangle that fits in the frame just perfect. In this shape there is no room for the LEDs.
So now we need to cut the backside to the LEDs will fit in there and there is room for light to shine through.
1. Get your hobby blade and cut about 5mm (same size as the LEDs I used) from the border.
Leave the corners as they are. We need them so the backside will still fit tight in the frame (see photo).
While cutting near the corners, do this gently. If you use to much force you might snap a corner off.
So now we need to cut the backside to the LEDs will fit in there and there is room for light to shine through.
1. Get your hobby blade and cut about 5mm (same size as the LEDs I used) from the border.
Leave the corners as they are. We need them so the backside will still fit tight in the frame (see photo).
While cutting near the corners, do this gently. If you use to much force you might snap a corner off.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
