Print PDF
Favorite
Email
Step 4Preparing the glass window
The glass window is pushed against the frame for a tight fit. Because of this, not much light will shine through.
So what we need to do it work something out that there will be some space between the glass and the frame.
I used foam for this, but many things can be used for it. I think even a piece of cardboard will do the trick.
1. Cut the foam in small squares so the fit nice in the corners (see photo).
The LEDs won't shine in the upper part of the corners, so the foam won't be blocking any light.
So what we need to do it work something out that there will be some space between the glass and the frame.
I used foam for this, but many things can be used for it. I think even a piece of cardboard will do the trick.
1. Cut the foam in small squares so the fit nice in the corners (see photo).
The LEDs won't shine in the upper part of the corners, so the foam won't be blocking any light.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
