Print PDF
Favorite
Email
Step 5Finishing up
Now we've got all parts that we need. All there is left to do is put them together.
1. Put the glass window in first.
2. Next you want to put a photo in. I didn't had a good photo lying around, so I cut out a piece of a Heineken advertisement from a magazine :)
3. At last you want to put the backside in it and fasten it with the metal clasp.
Photo 1: Back of the photo frame with the LEDs on
Photo 2: Front of the photo frame with LEDs off.
The light wont be visible very well in the daylight.
Photo 3: Front of the photo frame with LEDs on in the dark.
You can see there is light coming from the back. I tried to close the backside, but still some light came through.
If you're going to hang this frame on the wall, it will actually give a nice look with light coming from the sides as well.
1. Put the glass window in first.
2. Next you want to put a photo in. I didn't had a good photo lying around, so I cut out a piece of a Heineken advertisement from a magazine :)
3. At last you want to put the backside in it and fasten it with the metal clasp.
Photo 1: Back of the photo frame with the LEDs on
Photo 2: Front of the photo frame with LEDs off.
The light wont be visible very well in the daylight.
Photo 3: Front of the photo frame with LEDs on in the dark.
You can see there is light coming from the back. I tried to close the backside, but still some light came through.
If you're going to hang this frame on the wall, it will actually give a nice look with light coming from the sides as well.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
