I tried probably 3 or 4 other designs before i did this one, and I've still got a few others id like to try, but this design worked pretty well.
The problem i had with my first designs was the wiring. I kept running the wiring on top of the board and covering it with silicone or metal strips but while snowboarding my feet would rip the wires off. So i finally decided to go ahead and try to fiberglass one of them
Step 1: Find A Cheap Board
What you need:
A Cheap snowbaord ( I picked one up for $30)
Fiberglass & Resin
Drill & Bits