Instructables
Picture of LED Solar powered Model Garage.
I'm building a model railway layout for my Father and I wanted to add some lighting to the buildings.

Whilst at a Pound/Dollar store I saw these garden solar power lights, for 1.00 Pound/Dollar each.

Then I had an Instructable thought.
 
Remove these adsRemove these ads by Signing Up

Step 1: Tools & Materials required.

Picture of Tools & Materials required.
Soldering Iron.

Knife.

Hot glue gun.

Rocket Glue / Super glue.

Model building, available from Model stores.

Solar garden LED light.

Assorted plastic strips, available from Model stores.

Step 2: Take the Lamp apart.

Picture of Take the Lamp apart.
DSCF0688.JPG
Take the lamp apart and disgaurd everything except the Solar panel and the circuit board.

Step 3: Cut out the roof.

Picture of Cut out the roof.
DSCF0694.JPG
DSCF0697.JPG
Cut the inside of the roof to accommodate the solar panel, use some of the plastic strip around the edges.
Then glue into place, along with the windows.

Step 4: Make a bracket for the curcit board.

Picture of Make a bracket for the curcit board.
DSCF0701.JPG
Using some of the plastic strip assemble a bracket to hold the board.

Step 5: Attach the curcit board.

Picture of Attach the curcit board.
DSCF0704.JPG
Using the hot glue attach the board, re-solder the solar panel, and tape over the wires.

Step 6: Turn out the lights !

Picture of Turn out the lights !
DSCF0706.JPG
DSCF0707.JPG
DSCF0710.JPG
All done.....