Print PDF
Favorite
Email
Step 4Glue in the LEDs
Warm up your hot glue gun or use some other type of clear glue.
- Find a good hole to place the first of the LEDs into.
- Apply some glue to the outside of the LED, be sure not to get any on the lens of the LED.
- Place it in its hole, and very slightly angle it towards where the wall will be to get a better beam.
- Continue around till all the LEDs are placed, glued in, and angled correctly.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
