With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Maker Fair Mashup: G.R.L. LED Throwie + Cybords = Throwie TalkieDuring the 2006 Maker Fair the Graffiti Research Lab was demoing their LED Throwies an...
You will need:10mm Diffused LEDProgramed ATtiny45 ComputerCR2032 3V Lithium Battery1/2" Dia x 1/8" Thick NdFeB Disc Magnet, Ni-Cu-Ni plated1-inch wide...
We program the ATtiny45 chip using this and Atmel Avr Tools.
Bend the chip and LED leads to match. We bent off the middle leads so that they wouldent get in the way.
The chip is programed in a way that we can solder the LED leads right across the chip. The best way to solder them together is to hold one side with n...
Next you have to snip the LED lead betwen the ground and control pin so the chip can compleet the conection and make a message.
wedge it inbetwen the two leads.
This is the easiest and most fun.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »