LED Throwie Talkie by pcunning
Featured

Step 4: Solder the leads

The chip is programed in a way that we can solder the LED leads right across the chip. The best way to solder them together is to hold one side with nedle nosed plyers and tap the other side with some solder.

The longer LED lead should be soldered to the 'vcc' (power) and 'rst' pins of the chip. This shorts the chip reset and gives it a more secure conection. Make sure to reference the wiring diagram in this step to get the pins correct.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!