Step 1: Materials List

LED throwies consist of only a few inexpensive parts and can be made for ~$1.00 per Throwie. You can reference the parts list below or download the attached spreadsheet for more info on parts, part's numbers, vendors and application notes.

Part: 10mm Diffused LED
Vendor: HB Electronic Components
Average cost: $0.20 avg per LED
Notes: Cost reductions for larger quantities. Comes in red, blue, amber, white in both diffused and clear. Diffused works better than water clear for the Throwie application. HB has even created a Throwies packs page with deals on 10mm LEDs and lithium batteries!

Part: CR2032 3V Lithium Batteries
Vendor: CheapBatteries.com
Cost: $0.25 per battery
Notes: Cost reductions for larger quantities. With the 2032 Lithium batter, depending on the weather and the LED color, your Throwie should last around 1 -2 weeks.

Part: 1-inch wide Strapping Tape
Vendor: Your local hardware store
Cost: $2.00 for one roll
Notes: One roll will make many throwies

Part: 1/2" Dia x 1/8" Thick NdFeB Disc Magnet, Ni-Cu-Ni plated
Vendor:Amazing Magnets
Cost: $13.00 per 25 magnets
Notes: Cost reductions for larger quantities

Part: Conductive Epoxy
Vendor: Newark In One
Cost: $32.00
Notes: The epoxy is optional.
I have posted a how-to on making throwies with removable tabs where you can pull it out to turn the LED on and slide it back in to turn it bad off. It's not very hard to implement, and is quite useful for conserving battery power.<br/><br/>Here's the link: <a rel="nofollow" href="http://flickr.com/photos/everythingdigital/sets/72057594069888500/">http://flickr.com/photos/everythingdigital/sets/72057594069888500/</a><br/><br/>I'm also working on throwies that automatically turn on upon sticking to something and off when they are removed (as suggested above), and I have a few prototypes working but there are still some bugs to work out.<br/>
I have included your how-to on the <a rel="nofollow" href="http://graffitiresearchlab.com/?page_id=13">G.R.L. Throwies site</a> and in the upgrade section of the throwies instructables post. Thanks so much for the mods and looking forward to the next rev!<br/>
<p>Best quote: &quot;Throw it up high and in quantity to impress your friends and city officials.&quot;</p><p>How long do they last?</p>
Unknowable. Friends can be fickle, and city officials often disappear once installed.
<p>not sure city officials would be that impressed.</p>
<strong>INTRODUCING:</strong><br /> <br /> Throwies on steroids - <br /> The <strong>LED ULTRIE!</strong><br /> <br /> 7 LEDs arranged in a ring<br />
<p>Hello! Do you have an instructable for this one? I want to apply something similar for a soft toy I'm making, just took my first steps on LED 'wiring' yesterday and your solution seems to fit what I had in mind... without entering into Arduino land _I'm not ready yet! Thank you :)</p>
<p>so simple yet so powerful </p>
I have great news, you are today&#39;s winner of the &quot;I Made It&quot; Challenge for the month of june. Thank you so much for being a part of the instructables community and encouraging authors to post more projects!<br /> <br /> For winning you are receiving a 3 month pro-membership.<br /> <br /> http://www.instructables.com/community/June-is-I-Made-It-Challenge-Month-Win-a-Pro-Mem/
fun with LED throwies
<p>Will be amazing for party... Maybe next NYE.</p>
<p>wow that is cool ;)</p>
<p>Thanks for that, very helpful.</p>
<p>Letting the &quot;wrong&quot; LED lead touch the battery won't cause a short or <br>damage either component. LEDs are diodes and only function one way <br>round. It won't harm the LED to be reverse-biased, and indeed it's <br>designed to be connected this way in larger circuits. Lithium batteries <br>shouldn't present a disposal hazard when used in this way, as they'll be<br> fully discharged when they do reach landfill.<br><br>Better than chucking them once they've run down, why not &quot;catch&quot; them with a stick/net/string, and re-build them with a new battery?</p>
<p>is this instructable actually promoting the fabrication of &quot;throwies&quot; (as in &quot;throw-away&quot;) that consist of an LED and a Lithium Battery?<br><br>if so, I would like to line up with Shuyler, ask the author to educate himself concerning the ecological and social aspects of his proposal and publishing it on Instructables.com</p><p>I also agree that &quot;Instructables should have nothing to do with promoting it, and neither <br>should anyone else.&quot;</p>
<p>Are you serious it's a light bulb and a battery throw it around have a little fun and throw them away... What's the harm?</p>
I have little hope that facts will convince anyone who defends this practise.<br>but you asked what the harm is and I'll answer:<br><br>the harm is the battery<br><br>the hazardous ingredients of practically any type of Alkaline battery make it absolutely crucial to mindfully dispose of &mdash; not just throw them anywhere.<br>landfill should NOT be an option for disposal here.<br>closed substance cycle waste management defenitely is.<br><br>besides, throwing that kind of stuff is mere waste of material<br>(the value of wich unfortunately does not show in its price)<br>&mdash; economically and ecologically speaking.<br><br>(the fact that this type of button cell also contains lithium might also be a problem as lithium occures in such a concentration nowhere on this planet &mdash; except in man-made batteries.)<br><br>((and I would even regard it less of a problem if it WAS an actual light bulb, but it isn't. It's a piece of epoxy, sticking to a piece of acrylic, holding a little semiconductor&hellip;))
<p>Thats +1 Please don't pollute our earth for fun, that is total ignorance !!! </p>
<p>Ok, it's hazardous, but what kind of damage would throwing a few outside do? I probably sound ignorant to you, but I really just want to find out how big of a problem it is in actual numbers and what it will do to environment (I'm guessing the damage it causes is to the environment).</p>
<p>dude, this was posted 10 years ago. </p>
<p>Do you have to use the 10mm Diffused LED lights, or can you use 5mm or 3mm</p>
<p>Any LEDs will work. Just 10mm look the best.</p>
<p>Wow, hard to believe this was posted 10 years ago.</p>
<p>that is cool</p>
<p>It's great!<br>My nephew has long enjoyed doing it<br>Thank you very much for sharing. Keep going</p>

About This Instructable



Bio: I made weapons for the British government for over thirty-five years. Now that I am retired, I have gotten involved in outfitting graffiti writers and ... More »
More by Q-Branch:The EyeWriter Extinguidor POV CAM How to Go Postal 
Add instructable to: