Introduction: LED Trunk Light

Picture of LED Trunk Light

To change your light in your trunk to be brighter and clearer.

I added a second light in parallel electrically.

Step 1: Purchase Light

Picture of Purchase Light

The light should have a socket adapter to fit your car, choose the appropriate socket

Step 2: Solder the Additional Light in Parallel

Picture of Solder the Additional Light in Parallel

make sure you test the polarities.  LEDs will only work with + -  connected correctly.

Step 3: The Final Harness

Picture of The Final Harness

you have your harness.

Next step is to plug into car and route appropriately.

Step 4: Plug Into Car Socket and Route Through Car


About This Instructable




Add instructable to: