Print PDF
Favorite
Email
Step 2Pic code and assembly instructions,
c code
assembler
hex
assembly is straight forward, the common cathod of your RGB led gets soldered to pin 2 of the pic, R-G-B pins get soldered to 7-6-5 and the pic power and ground go straight to the battery power and ground.
to put the whole thing together i just put the pic upside down on top of the battery casing, with a small dot of hot glue, bent the power and grond pins to reach over to the battery leads and attached the LED and hot glue a magnet and i was ready to go, total construction time was about 1.5 minutes.
assembler
hex
assembly is straight forward, the common cathod of your RGB led gets soldered to pin 2 of the pic, R-G-B pins get soldered to 7-6-5 and the pic power and ground go straight to the battery power and ground.
to put the whole thing together i just put the pic upside down on top of the battery casing, with a small dot of hot glue, bent the power and grond pins to reach over to the battery leads and attached the LED and hot glue a magnet and i was ready to go, total construction time was about 1.5 minutes.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Aug 26, 2008. 3:46 AMyazug
says:
I like the idea, I'm working my own version of this with what I have, and was wondering was there anything in your firefly.h file? Thanks YaZug
Reply
 |
Add Comment
|
