Instructables
Picture of LED logo Rammstein on  bicycle
1.jpg
34.jpg
37.jpg
39.jpg
41.jpg
42.jpg
Hello I am from Russia. I like bike and LED. I do LED bicycle wheels: http://www.instructables.com/id/LED-bicycle-wheels/ but i want more...
I love rock and I like the rock band Rammstein, so I decided, in addition to lighting on the wheels make the glowing logo on the frame of my bike.
Project completed 31/12/10
2 hours before the New Year!

I want to show you the process of creating.
I sorry for my bad English, I use a translator.
 
Remove these adsRemove these ads by Signing Up

Step 1: Step 1

Picture of Step 1
measured the shape of the paper

Step 2: Step 2

Picture of Step 2
4.jpg
Transferred to the tree, the outer panel was meant to be out of it.

Step 3: Step 3

Picture of Step 3
6.jpg
Use paper baking transferred logo on the tree, but decided to use a plastic panel, which sheathe the walls, and it was decided to make the front panel of it, and the wood used to frame construction (later the tree will be connected with wooden sticks).

Step 4: Step 4

Picture of Step 4
8.jpg
Also changed the size of the insert, it seems to me if it is not on top of the frame, and just close the gap between them will be better.
Logo on the plastic panel.

Step 5: Step 5

Picture of Step 5
10.jpg
11.jpg
12.jpg
13.jpg
14.jpg
Void between wood paneling, I closed the foam

Step 6: Step 6

Picture of Step 6
17.jpg
I bought a lamp from the ceiling and cut him out of the right glass

Step 7: Step 7

Picture of Step 7
Painted design elements in black.

Step 8: Step 8

Picture of Step 8
20.jpg
21.jpg
22.jpg
The very stones of which was described above, they stand on 3 corners and joined with wood panels forming the framework of sticks in holes drilled through which the tie that will keep the entire structure.
Took its place foam insert.

Step 9: Step 9

Picture of Step 9
24.jpg
Did the red edging logo.

Step 10: Step 10

Picture of Step 10
Pasted frame and the inside of the glass foiled tape

Step 11: Step 11

Picture of Step 11
27.jpg
LEDs secured in the foam.

Step 12: Step 12

Picture of Step 12
29.jpg
Secured inside the LED and pasted all the foil.

Step 13: Step 13

Picture of Step 13
31.jpg
Secured with screws exterior plastic panels with the logo of Rammstein, for pieces of wood stuck in the corners of pieces of rubber that sticks do not knock on the window frame. Beautifully turned out though!
MooMeat423 months ago

It makes me laugh. Germans love their Fahrräder

You should add this to the Bicycle Contest! http://www.instructables.com/contest/bicycle/
imbigman2 years ago
Ich Will
TheMaker8882 years ago
German Engineering Inside :)
TheMaker8882 years ago
Rammstine :D
nice logo man, i made one out of ANSI text :)
Vranov2 years ago
Where's resistors?
muromec (author)  Vranov2 years ago
not resistors
zazenergy2 years ago
This looks awesome! I would like to know more about the list of components you used to make this as well as how you had you LED light up. Thanks!
muromec (author)  zazenergy2 years ago
See all steps, i say components, and see foto