Instructables

LEFT 4 DEAD DUCT TAPE ALTOIDS MINI SURVIVAL MEDKIT

Picture of LEFT 4 DEAD DUCT TAPE ALTOIDS MINI SURVIVAL MEDKIT

IT IS SUUUUUUPER EASY

 
Remove these adsRemove these ads by Signing Up

Step 1: GET AN EMPTY ALTOIDS TIN

Picture of GET AN EMPTY ALTOIDS TIN
SAM_0782.JPG

Alright, we all got these somewhere around. Get one of these and some duct tape. I used red black and white duct tape. I also used a red sharpie to write in first aid.

Step 2: SKETCH IT OUT

Picture of SKETCH IT OUT

I sketched out the design to make it easier on me.

Step 3: LAYER TAPE

Picture of LAYER TAPE
SAM_0786.JPG
SAM_0802.JPG

Okay, so right here all I did was take of the lid, and put a piece of black duct tape on top of the words so it wouldn't be seen through the red duct tape. After that i bent in the side hinges of the tin.

Step 4: DUCT TAPE IT ALL

Picture of DUCT TAPE IT ALL
SAM_0789.JPG
SAM_0788.JPG
SAM_0790.JPG
SAM_0791.JPG

Use the red duct tape to cover all of it. I covered it all because when I close it the extra duct tape where it closes will create a super strong seal.

Step 5: DUCT TAPE THE BOTTOM PART

Picture of DUCT TAPE THE BOTTOM PART
SAM_0803.JPG
SAM_0805.JPG

After that, I duct tape the bottom, and cut out some small thin strips of duct tape to use as handles and taped them to the side, as seen in the pictures.

Step 6: MAKE THE DESIGN

Picture of MAKE THE DESIGN
SAM_0793.JPG
SAM_0794.JPG
SAM_0795.JPG
SAM_0796.JPG
SAM_0797.JPG

All i did here was just make the design, follow the pics:)

Step 7: BAM!!! YOUR DONE

Picture of BAM!!! YOUR DONE
SAM_0807.JPG

That is it guys and gals, hope you enjoy!

Here's the inside of the medkit

"https://www.youtube.com/watch?v=XjvM7lV5qzs&feature=youtu.be"

Don't forget to check out my craft channel on youtube

It's just starting but subscribed to stay tuned;)

seamster4 months ago

Nice project, thanks for sharing! You ought to put a photo of the finished tin/medkit as your main photo. It's looks cool and should be up front and center to see! :)

Dromaeosaurus4 months ago

that's pretty cool. I love L4D and will have a go at this.