In this Instructabe you and I will walk through the steps for you to build your own LEGO Light Switch. If you're into that sort of thing.
Step 1: Gathering materials
- One (x1) Decora style light switch
- Two (x2) LEGO 4x4 plates
- Two part epoxy glue. I used LePage 5 minute epoxy, but any two part epoxy should work just fine.
- Something to mix and apply the epoxy (toothpicks, matchsticks, what-ever-works)
- Some newspaper or other disposable work surface.
Step 2: Apply the epoxy
Now, apply the epoxy resin and hardener (the two parts of epoxy.). This is usually done in a fifty-fifty mixture, but read your epoxy's directions. For application I applied and mixed the epoxy directly on the light switch. This eliminates waste from mixing and then applying, but you need be careful not to apply too much. With too much the epoxy may seep out the sides and fuse the light switch. A single stage switch is a switch with no purpose in life. How sad.