Introduction: LEGO Tenth Doctor, Sonic Screwdriver, & TARDIS

Picture of LEGO Tenth Doctor, Sonic Screwdriver, & TARDIS

I was looking around on Instructables the other day, and I couldn't find a really good, easy-to-make model of the TARDIS. So, naturally, I decided to make one my self, and include a Tenth Doctor minifigure and Sonic Screwdriver. It's not perfect, but it looks pretty good, it opens up, and with a little effort, you can fit the Doctor inside.

Step 1: Pieces You'll Need

Picture of Pieces You'll Need

Refer to the picture for the pieces you need to build it.

NOTE: 1. THESE ARE JUST THE PARTS TO THE TARDIS. 2. THE FIFTH 1X1 PIECE DOES NOT NEED TO HAVE A HOLE IN IT. 3. THE BLUE HINGED PIECES ARE IN THE PLACE OF A THIRD 1X4. THEY DON'T NEED HINGES.

Step 2: Attaching the Door and First Layer

Picture of Attaching the Door and First Layer

From here on, just do what the pictures say

NOTE: THESE PICTURES ARE TOP-VIEW SO YOU CAN SEE EVERYTHING

Step 3: 2nd Layer

Picture of 2nd Layer

Step 4: 3rd Layer

Picture of 3rd Layer

Step 5: 4th Layer

Picture of 4th Layer

Step 6: 5th Layer

Picture of 5th Layer

Step 7: 6th Layer

Picture of 6th Layer

Step 8: Roof

Picture of Roof

Step 9: Attach Roof, Build Minifigure, and You're Done!

Picture of Attach Roof, Build Minifigure, and You're Done!

Put the roof on as shown, build the minifigure if you like, and you now have a LEGO TARDIS.

Comments

fireball1234 (author)2013-10-04

Does it travel through space and time?
----------------------------------------------------

About This Instructable

4,396views

21favorites

License:

More by PTMoney12:Pokemon X and Y Double Battle comboLEGO Tenth Doctor, Sonic Screwdriver, & TARDISInstall a Flash Drive as a Memory Unit on the XBOX 360
Add instructable to: