Introduction: LEGOs Out of LEGOs

Picture of LEGOs Out of LEGOs

This instructable will show you how to make a lego three times the size of a normal one using:

4 1X2
4 1X4
a 4X4 plate
a 2X2 cylinder
8 1X2 plates and
2 1X4 plates.


You should probably try to use only one color, but i didn't have enough.

You can actually make this instructable with other pieces as long as it's hollow and 3X3X3.

Step 1: Start Your Building!

Picture of Start Your Building!

Place a 4X1 brick, then two 2X1s. Finish it off with another 4X1.

Step 2: Going Up!

Picture of Going Up!

Rotate the bottom 90 degrees and repeat.

Step 3: Now for the Plates...

Picture of Now for the Plates...

Rotate yet another 90 degrees and repeat, but this time with plates.

Step 4: Continue...

Picture of Continue...

Rotate another 90 degrees (this is the last time) and add:

 two 2X1 plates facing horizontally
 two 2X1 plates facing vertically and
 two more 2X1 plates facing horizontally

Step 5: Top It All Off

Picture of Top It All Off

Add the 4X4 plate and top it all off with the 2X2 cylinder.


Hey, you're done!

Step 6: But Wait, There's More!

Picture of But Wait, There's More!

You can make more sizes and shapes if you like, the possibilities are endless!

Comments

pokemech (author)2013-03-24

you... you ca... you can't just... *falls over dead

the besy made it! (author)pokemech2015-10-21

I like how you did this!

TheAmazingMaker (author)2014-08-28

:O *mind blows up

do they fit together?

drkwhitedragon (author)2014-01-31

LOL NICE! :D

About This Instructable

2,518views

6favorites

License:

More by ryanninjasheep:How to make a snowmanHow To Make a Simple Lego CrowdLEGOs out of LEGOs
Add instructable to: