Introduction: LIFTING JACK

Picture of LIFTING JACK

It is a lifting jack that use for lifting some things that is very useful and enjoying project

Step 1:

Picture of

Step 2: MATERIALS REQUIRED

Picture of MATERIALS REQUIRED

1.ICE CREAM STICKS

2.A SKETCH PEN

3.A SCALE

4. A TOOTH PICK

5.A PLASTIC CUBE

6.CARD BOARD

7.SYRINGE 2

Step 3: HOLE THE ICE CREAM STICKS

Picture of HOLE THE ICE CREAM STICKS

Take the scale and point the ice cream stick like shown in picture and be serious when making hole

Step 4: ATTACH THE ICE CREAM STICK

Picture of ATTACH THE ICE CREAM STICK

Take a copper wire or something to attach the sticks like shown in the picture

Step 5: ATTACH IN CORNER

Picture of ATTACH IN CORNER

Take the attached sticks and attach that sticks in corner as shown in picture

Step 6: TAKE 2 STICKS MORE

Picture of TAKE 2 STICKS MORE

Take the same type of ice cream stick and mark and hole like this as shown in figure

Step 7: TAKE CARD BOARD AND TOOTH PICK

Picture of TAKE CARD BOARD AND TOOTH PICK

Take the card board and ice cream sticks that you are already made and attach the tooth pick as shown in figure and fix that the only one side of the sicks you makes

Step 8: TAKE THE SYRINGE

Picture of TAKE THE SYRINGE

Take the syringe and hole that and fix that to the tooth pick that you are already fixed it on the sticks shown in figure

Step 9: TAKE ANOTHER SYRINGE

Picture of TAKE ANOTHER SYRINGE

Take the another syringe and plastic cube then attach that as shown in the figure

Step 10: FINALY YOUR LIFTING JACK IS READY

Picture of FINALY YOUR LIFTING JACK IS READY

Comments

About This Instructable

76views

2favorites

More by madhusudhann987:LIFTING JACKPENCIL X BOWBULB CANNON
Add instructable to: