Step 1: WHY AND WHAT YOU NEED
-You only need one USB port to run it (great for older laptops)
-It leaves no trace on the computer when you are done (the whole file system is built in RAM)
-You have all of your applications, desktop, and data no matter where you go.
-Will read NTFS file system but, will not write making it safe to use on any machine (you can make it write NTFS with some additional software).
-Easy to update software.
-Ability to boot USB stick with a motherboard that doesn’t support that. Cool.
What you’ll need:
1 USB hub with external power supply (think old and cheap, better chance it will work with linux)
1 thumb drive (at least 512 mb I would suggest a gig)
1 USB wifi adaptor ( linux compatible check the forums here http://www.slax.org/forum/
1 4 AA battery pack with on off switch (Radio Shack)
1 ISO of Slax linux http://www.slax.org/download.php (I prefer the Kill Bill version)
1 copy of Myslax creator http://myslax.bonsonno.org/download.php
Case parts I used two pieces of plexiglass with standoffs from home depot