Print PDF
Favorite
Email
Step 3Pass through for sound
I wanted to be able to listen to the music while looking at the flashing lights, novel idea I know...
So I wired up two 1/8" stereo jacks wire the two together, and then hang 3 wires off of one, the negative will go to pin 4 on both chips, while the left signal will go to pin 5 on one chip, and pin5 on the other chip.
So I wired up two 1/8" stereo jacks wire the two together, and then hang 3 wires off of one, the negative will go to pin 4 on both chips, while the left signal will go to pin 5 on one chip, and pin5 on the other chip.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
May 13, 2009. 2:56 PMcoletrain
says:
could u not hook up a microphone to the input?
Reply
 |
Add Comment
|
