Introduction: Ladder Braclet

Picture of Ladder Braclet

A fun looking braclet

Step 1: Putting on the Base

Picture of Putting on the Base

Start by outlining you loom with what ever color and make sure that you are stopping at the second to last pin and going to the middle last pin and same with the other side

Step 2: Ladder Part

Picture of Ladder Part

Put on the colors of your choice by going back and forth to the next side and make sure that there is a pin in between the bands

Step 3: Putting on the Middle

Picture of Putting on the Middle

Put a line straight up with the rubber bands then putting on a cap at the top

Step 4: Hooking the Middle

Picture of Hooking the Middle

Hook the middle like regular

Step 5: Follow Step 2

Picture of Follow Step 2

Follow step two on top of the middle

Step 6: Finishing It

Picture of Finishing It

Hook the base on both sides and going back down when your done with one side then take it off by putting hook through all tuber bands and pulling off

Step 7: Pull It Off

Picture of Pull It Off

Carefully remove it and enjoy

Step 8: Enjoy

Picture of Enjoy

Show to your friends and teach them


AliciannaL (author)2014-10-05

i made it i think it is easy you guys should try it

marionpixie (author)2014-01-02


MakennaWhiting (author)2013-12-27

That is really cool

dprator (author)2013-12-25

that is beautiful!

djk45 (author)2013-12-25

wow nice i have loom

About This Instructable




More by Katie n Elly:Peanut Butter CookiesOrganizing Your Rainbow LoomZigzag Braclet
Add instructable to: