Print PDF
Favorite
Email
Step 2Direction found
figured out all the components.
the hub of the thinner gear was cross drilled and a steel shaft was inserted as the swing pivot (pic 2), same thing was done in the above attachment using an assortment of gears and spacers, a woven wire protective sheath was used to hide the 24 conductor ribbon wire harness.
Idea was to have the fixtures swing, have a friend who owns a yacht and the clock rocks perfectly with the motion of the ocean
the hub of the thinner gear was cross drilled and a steel shaft was inserted as the swing pivot (pic 2), same thing was done in the above attachment using an assortment of gears and spacers, a woven wire protective sheath was used to hide the 24 conductor ribbon wire harness.
Idea was to have the fixtures swing, have a friend who owns a yacht and the clock rocks perfectly with the motion of the ocean
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Sep 15, 2011. 5:45 PMduncan_a
says:
Stunningly beautiful and wonderful engineering...
Reply
 |
Add Comment
|
