Step 8: Smoke Test

I have a friend who claims computers run on smoke, because "Once you let the smoke out, they don't work anymore." Well, I sure wasn't going to let the smoke out of this one...

What, me worry? It's fine!
<p>I don't know if this is dead or not but i need a controller board for an LG LP173WF2(TP)(A1 used to be on alienware m17xr3 120hz 3d.</p>
question: Is there any way to make it so I can plug my Apple PowerBook G4's Titanium Monitor into any computer. I dont want to have to mount it or anything.. I want to use it as is. I disconnected it from my laptop about a year ago when it crashed. I was hoping someone would know how. I don't know enough about hardware to understand if this is possible. and if it is I would love to do that. I have it mounted on my wall and at less than a quarter of an inch it would make a really sweet flat panel. i just dont know if it's possible. Thanks
You might wanna check out a controller similar to this, http://www.ebay.com/itm/NJY2261-V1-0-LCD-Controller-DVI-VGA-PC-Audio-LVDS-Jumper-Change-Resolutions-/271159830087?pt=US_Server_Boards&amp;hash=item3f2262a647
What type of cables extend from it? Pics would be incredibly informative in this situation.
My dad has an old laptop and this is a great thing to do with it!<br>
can i do this with just the lcd screen and the video card? <br>or the small chip connected upto the monitor not in side the monitor, connected to the motherboard?
can i use this just as a pc display
Ill be sure to upload a video and post it in these comments when i stab a hole though the screen, and maybe shoot it...
hey i am doing with the same problem,<br>can we use lcd as desktop monitor with out mother board.<br>
FTW :(<br>I got a dinosaur laptop (around the launch of windows 2000), and I thought it would be cut, snip, solder TahhhDahhh! <br><br>Well there might be no use for the laptop, but at least I know what to do with my new tactical tanto knife! ;)
I agree, actually. Everything needs a big red button... Especially homebrew stuff.
i think what every one is looking for is what this guy did to resolve the problem!<br><br>http://www.oldvcr.tv/projects/index.html?Mode=View&amp;ID=20<br><br>The only catch is you need the right laptop screen and the right motherboard for it to work!
Why don't you just connect a VGA cable from your computer to the laptop, then set the computer to project it's screen onto the laptop? Look it up.
That doesn't work, the laptop won't accept any inputs on the VGA. It's output only.
can yo make a step by step on how to hardwire it
and ....the 2nd&nbsp; monitor ????????
MaxiVista is an interesting program.<br/>FYI there is an open source program that will do the same sort of thing.<br/>Its called Synergy: <a rel="nofollow" href="http://synergy2.sourceforge.net/">http://synergy2.sourceforge.net/</a><br/>If you are going to use knoppix, you might was well use an open source programs for the screen stuff as well.<br/>
From what i can tell synergy is not the same thing. It doesn't not allow you to drag windows from one system to the other does it?
i think most new computers come with duel monitor setup.. i have a toshiba satellite laptop and it has a duel monitor.. you plug in the second monitor and in the control panel you set up where compared to the default screen is the second one located and then you can set them up to work together so you can drag from one screen to another or you can set it up to be either/or monitor.. and a couple other settings that i have not used is there. i love connecting my 47in wide screen tv to my laptop..playing WoW on the tv and still having the laptop screen for the internet. its great. i might take some of my old laptop monitors and doing this!
Even the right old Toshiba Satellite Pro Notebooks had the ability to have dual display, all you had to do was plug in a VGA monitor into the VGA socket on the back, and work a couple settings, and voila ...(I think that last word is spelled correctly, the only suggestions I'm given for it are viola, which is a flower, and some voile, whatever that one is.) But I see the point of buddy who replied to your comment before me, it is more fun to do it using software on a second computer to have it behave like a second monitor connected using Ethernet...<br />
Just a quick note:<br /> You got the word correct.&nbsp; Well, close enough...<br /> <br /> It is actually voil&agrave;.&nbsp; There is a French accent grave (`) over the &quot;a&quot;.<br /> A voile is, apparently, a light semitransparent fabric.<br /> <br /> <br /> What if you need to connect to the internet via Ethernet?<br />
I know there's supposed to be one there, but I keep forgetting how to insert an &quot;a&quot; with the accent grave over it, but wasn't sure on the spelling...lol. <br />
its a dual screen set up. a duel is a fight to the death or a challenge between two parties please know your english&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; im not even american and i know that<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <br />
&quot;you am not use capping or punctuantions&quot;<br /> -The Grammar Communists<br /> <br /> (Also, if the English speak English, shouldn't Americans speak American?)<br /> <br /> <br /> I think the idea of monitors that fight to the death is a bit amusing.&nbsp; I&nbsp;think someone should develop a duel screen...&nbsp; (Or would that be a monitor one can use to fight someone with? Hmmmm...)
yeah, but this isn't making a dual monitor setup using vga. This uses software on a second comp to make it act like another monitor that's hooked up using ethernet.
In Linux there is a way to use <a href="http://en.wikipedia.org/wiki/Xinerama" rel="nofollow">Xinerama</a> over the network, I do not currently know how to do this.&nbsp; There are a few tutorials that exist but currently I do not know were they are, there was at one point a 32 screen display mad using this I believe.<br />
It is actually using Xinerama over <a href="http://en.wikipedia.org/wiki/Xdmx" rel="nofollow">Xdmx</a>, that allows it to be used over the network.<br />
At the company I work for, we call it the magic blue smoke; the software guy always lets the magic blue smoke out and has to give the equipment to the electronics guy to have him put more magic blue smoke in.<br />
I would do this with my old laptop but the screen and ballast are more expensive than a new monitor.<br />
That is so sweet ! ( I wipe a tier of pride from my eye as I saw the KNOPPIX screen ) in this project. I got a old Gateway 2000 laptop I would like to do this with but it has no CD&nbsp; or DVD drive . I will look in to it using a floppy drive disrto <br />
Your friend must be running on smoke to actually think that hahaha<br />
Is it possible NOT to run maxivista on startup and have a computer&nbsp; you can still use for something else?<br />
Great instructable, but like many others that have probably stumbled onto it, I just wanted to used the laptop's lcd, presumably without needing extra software.&nbsp; I've been using dual monitors on my laptops for awhile, but all my monitors are crts and I'm running out of desk space.&nbsp; I have 2 matching gateway laptops (one was purchased to replace the fried motherboard on the other) and have wanted to connect the dead machine's screen to the monitor port on the other, mainly just because they match.&nbsp; How cool would it be to have a second monitor that slides out from behind (or hinged to...whatever!) the built-in screen?&nbsp; The idea is to take the multiple monitor arrangement on the road without lugging crts or investing in still-overpriced (imho) flatscreens?&nbsp; <br />&nbsp; I keep hearing that it can be done, but nobody seems to know how to do it.<br />
When I get smarter, I'll try this.
Hi, know how to get a laptop screen working on its own? I mean without the hardware, no cpu, no motherboard, nothing. I wish I could, cuz I have like euhm.....about ...... w8, let me count 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17, yep 17 laptop screens. Don't ask me where I got em. 17 screens without laptop. please help me!!!
As stated on the introduction page of the Instructable, there are companies that manufacture standalone controllers for LCD screens. You will need to match the model and size of each screen to a compatible controller. Controllers generally run between $200 and $700 depending on features. If this is unacceptable, feel free to research the possibility of constructing your own controller. At a recent EDA Tech Forum, a vendor showed me a version his company had built using nothing more than an FPGA dev board and a power supply. It is entirely possible to do with the right tools.
thnx......I won't spend too much money on these, but I also know some one who build his own controller. It didn't look simple.<br/><br/><a rel="nofollow" href="http://forum.notebookreview.com/showthread.php?t=99080">http://forum.notebookreview.com/showthread.php?t=99080</a><br/><br/>I guess there is no other way than to follow their steps...<br/>
essentially a digital picture frame compatible with other things such as another computer as a second monitor, i like it, im going to do thing but mount it on plexiglass
talking of plexiglass where can u get it ?
Hardware store.
Is there any freeware alternative to Maxivista, something like freevnc...?
The closest I have found is Synergy:<br/><br/><a rel="nofollow" href="http://synergy2.sourceforge.net/">http://synergy2.sourceforge.net/</a><br/><br/>Which allows for KVM-like behavior over the network. It's a slick program.<br/>
Yeah, the most important step is left out. How do you plug it into your computer?
Please see Step 9: "Once the monitor has booted Knoppix off of its CD, A program called MaxiVistaViewer (running under wine) takes over. The main system picks up the Viewer off the network, and with MaxiVIsta Server, creates the equivalent of a super fast RDP. The main system then stretches its screen onto the 2nd monitor."
Ok, so this isn't really using the flat panel as a second monitor as much as it's using the whole laptop and software to simulate a second monitor?
As noted in both the Instructable and previous comments, yes.
Pretty impressive but you need to introduce yourself to taps and dies. I'm pretty sure you can get them piecemeal (a 4-40 die and some steel rod will make your life easier). Or if you wanted to go the other way you use this opportunity to justify (keep that WAF above 80 son!) a mini lathe/mill and get a threading attachment for it. And yes, you need a pneumatic nibbler. I cut out a grid pattern in a PC case for cooling purposes in about an hour and it looks pretty damn good. Tools are what separate us from animals.
wait hold on do i need to have a keyboard to set up MaxiVista ? because according to the specs there is no more keyboard no more mouse or did i miss that?
Technically, no. I built a "custom" Knoppix CD on my main system that auto-boots MaxiVista, which I then used to boot the 2nd monitor. If you wanted to build the image on the 2nd monitor itself you would need a keyboard/mouse, but only for the setup portion. Once the program is running on the second monitor everything is controlled from the main system.
Hey what's up? I'm Chris, I have a laptop and I'm trying to do what you did right now but I don't have a working hard drive in my laptop is ther any way the you could make me a copy of your disk and mail it to me I would love to have my laptop up with my other computer I bolt my laptop for $30.00 dollars from a friend and i've never goting a hard drive for it, i am willing to pay 2 ship the cd i really need it please let me know later Chris....

About This Instructable




Bio: This account will not be maintained, I am done with Instructables. Good luck to you all.
More by punish3r:Flourless Chocolate Cake Laptop Converted to 2nd Monitor 
Add instructable to: