Print PDF
Favorite
Email
Step 4Glue the Strips On
The grip strips may be attached to the stand by any means necessary and available, but I found hot glue to work very well. It takes a bit more time and you have to work quickly because the metal stand draws the heat out of the glue very quickly leading to fast cooling times.
Your simple laptop stand is finished!
The top and bottoms will look similar to the pictures below.
In the future, I may add PC cooling fans in between the mesh layers so I cut a hole in the back of the stand to allow for additions to be made to this project.
Your simple laptop stand is finished!
The top and bottoms will look similar to the pictures below.
In the future, I may add PC cooling fans in between the mesh layers so I cut a hole in the back of the stand to allow for additions to be made to this project.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
