Introduction: Laptop Stand

in this project we are making a laptop stand. A laptop stand is a stand on a angle that holds a laptop.

Step 1: Get the Design

what you want to start with is a design. I got my design of a website called thingiverse and the person who made it is Andrew Sleigh.

Step 2: Illustrator Design

after you have your design and you have it in illustrator then you want to size it to what you want. the size will be different for different types of laptops.

Step 3: Laptop Stand Prototype

I done everything on illustrator that I need and all of the parts are on the laser cutter. Now you don't just want to just go full size you just want to try it out at 50% to see if you like it.

Step 4: Full Size

once you are happy with everything you double check everything then you can cut it full size.

Comments

author
Swansong (author)2017-09-07

I like this, it's simple and easily portable :)

About This Instructable

192views

7favorites

License:

More by jacobgsscott:Laptop Stand
Add instructable to: