Large ceiling lamp

Step 3 The spokes I needed for the large bag

The bag I used for this lamp is much larger (80 x 120 cm, 32" x 48") and made out of rather thin cloth. It needed some support to keep it close to the ceiling. This picture shows the wires stuck through the ring as seen from the inside. I drilled the holes and inserted the wires before inserting the ring in the sack. The wires were too long (the lamp was too flat) so I pulled them inward a bit to adjust.

Depending on the material of the bag you may not need the spokes. I used thin spokes to keep them inconspicuous.