With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Today we're going to make a simple jewelry / keepsake box with the lasers available here at Techshop. This box design originally came from the epilog ...
Here is the file in CDR (corel draw) form. You can add a simple etching on the bottom piece such as the person's name if you like.
You can use any size piece of wood that would fit the pieces of the box. ie a piece of poplar 6"x 24"which you can buy at Lowes for 4 bucks would work...
Here are the settings I used for a 60watt epilog laser. Not that my rastering is set to bottom up. This also helps with smoke marks thus giving you a...
Here it is in the laser rastering and cutting the pieces.
Now we need to peel off the tape before putting the box together. I just use my fingernails for this one.
Putting the box together is our last step for this project. Most of the pieces are identical except for the front and back piece. (refer to photo) Wh...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »