Introduction: Laser Cut Pin
Custom laser cut pin. The pin could be any image or design you would like. These pins fit great in Altoids cans.
What you will need:
-pin back with nail
Step 1: Design
Draw up a design in AutoCAD that you would like to have as a pin. The size i used for my pin was 2 inches long.
Step 2: Print
Print your design out with a laser printer
Step 3: Glue
Glue on your preffered pin to the back of your laser cut design
Step 4: Altoids Can
These pins are great for Altoids cans. They can be used as a nice present for a friend or just for your enjoyment.