With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
My sister and I headed down to heatsync labs in Mesa, AZ this morning to try out the laser cutter on some t-shirts! (By the way? Do you think this i...
As usual, first gather up all of your materials. For this we're using a 5% polyester/95% cotton blend t-shirt. We also grabbed a piece of cardboard ...
My sister's pattern would transit her shirt's collar with the laser on, which is a problem. Rather than try to custom fit the pattern to the shirt, w...
Stretch the shirt so that it is tight against the cardboard, and tape the edges back.
We taped the cardboard/shirt down so that it wouldn't jostle around, and set the laser to work! Our settings were: Speed: 50mm/s Power: 16watts Thi...
The result was really nice. Towards the top right, unfortunately, we cut the collar a bit :(. Oops! This was because we started the cut at much too...
Here's the final result!
Remove these ads by
Signing Up
Not NiceInappropriateSpam20,713 views
43 favorites
Posted:
Jun 16, 2012
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »