Print PDF
Favorite
Email
Step 4Wrapping it Up
Once you have your laser cut-out done, all that's required is some good old fashioned wrapping.
1. Wrap your gift in the wrapping paper, using normal tape-and-fold procedure.
2. Take your cut-out and apply a layer of glue to the back with a glue stick.
3. Use an exacto knife to clean the fine edges of stray paper or glue particles.
4. Press the cut-out onto the face of your gift. Apply pressure and you're done.
1. Wrap your gift in the wrapping paper, using normal tape-and-fold procedure.
2. Take your cut-out and apply a layer of glue to the back with a glue stick.
3. Use an exacto knife to clean the fine edges of stray paper or glue particles.
4. Press the cut-out onto the face of your gift. Apply pressure and you're done.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
