Laser Cutting T-Shirt Transfer Film





Introduction: Laser Cutting T-Shirt Transfer Film

Here we will be using LaserFlex on our Trotec laser cutting machine.

What's LaserFlex you ask? LaserFlex is a transfer film for customizing textiles. Here's a list of its awesome powers:

The laser can reproduce even the finest details with intricate design.

LaserFlex is characterized by good opacity and high elasticity.

LaserFlex has been specially designed to not only be cut but also to be weeded by laser. This means that it is no longer necessary to mechanically remove excess material between graphics and letters or along edges.

Laser Flex film can be washed at up to 60 degrees Celsuius.

Step 1: Cutting Out the Material

Using the Speedy 300 laser machine with 2.5 power and 0.5 speed, we cut out the LaserFlex in the design we wanted on our shirt.

Step 2: Transferring the Material

Once the LaserFlexx is cut, we placed our t-shirt onto our heat press.

We then placed the LaserFlexx on top of the shirt, face down.

After setting the temperature to 330 Fahrenheit we closed the press for around 18 seconds.

Step 3: The Big Reveal

Now that the material has transferred we carefully peeled the LaserFlexx off of the t-shirt.

Enjoy modeling your awesome design.

Step 4: Tips Before Sending the File

Before sending the file to the laser machine remember to:

1 - Flip the image

2 - Set the inner fill to engrave

3 - Set the outer cut to a kiss cut



    • Trash to Treasure

      Trash to Treasure
    • Paper Contest 2018

      Paper Contest 2018
    • Science of Cooking

      Science of Cooking

    We have a be nice policy.
    Please be positive and constructive.




    Thanks very much for this. Great product. There is a supplier in Australia for this so Im stoked..