With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is a simple project I did at the TechShop (http://techshop.ws). I had a set of old glass drinking cups just sitting in the cuboard collecting dus...
In CorelDRAW, Adobe Illustrator, or some other program that can communicate with the laser you are going to use, you can design what you want to engra...
Before you begin the project, make sure to familiarize yourself with the basic operation of your Laser and the general safety precautions recommended ...
When placing your piece on the rotary attachment, it may take some creativity if it has a handle or a base that is wider than the top. In such cases t...
Be sure to focus your laser before setting your home position because the laser dot will seem to have moved. Once it is focused, note that with the ro...
In the print menu of the design program you used, go under setting to choose the laser power, speed, and so forth. For the Epilog 45W Helix laser, 45%...
When you are done, wipe off the engraved portion of the glass to remove any shards. For transporting your piece safely home, I found placing them insi...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »