Print PDF
Favorite
Email
Step 2Attach the rotary attachment
Turn on the laser cutter. Drop the bed to the bottom and remove the honey comb panel.
Turn off the laser cutter. Align the pegs of the rotary attachment into the pegs in the bottom of the laser cutter. Plug in the ribbon cable into the socket on the side of the laser cutter.
Turn the laser cutter back on.
Turn off the laser cutter. Align the pegs of the rotary attachment into the pegs in the bottom of the laser cutter. Plug in the ribbon cable into the socket on the side of the laser cutter.
Turn the laser cutter back on.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
