Print PDF
Favorite
Email
Step 3Testing
Cover your glass with blue painter's tape. Place it onto the rotary attachment with the larger side of the glass closer to the cut head and use the dial to adjust the glasses height until it lays level.
Raster cut the tape with the following settings:
DPI: 300
Speed: 100
Power: 10
You can use the cut file attached below to get started. Keep in mind this file is of my face. You will need to make one of your face.
Figure out your measurements for your own cup and plan accordingly when making your image file.
Raster cut the tape with the following settings:
DPI: 300
Speed: 100
Power: 10
You can use the cut file attached below to get started. Keep in mind this file is of my face. You will need to make one of your face.
Figure out your measurements for your own cup and plan accordingly when making your image file.
drink glass.cdr324 KB| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
