Introduction: Laser Etched Robot

Picture of Laser Etched Robot

While experimenting with burning images with a Keyence laser, I decided to have a little fun with Robot.

I made a quick outline of Robot in Gimp and marked the image on a piece of steel coated with red marking dye.

Step 1: Robot Outline .XCF

Picture of Robot Outline .XCF

Not much more to report. I've included the .XCF file in case anyone else needs an outline of Robot.

Comments

seamster (author)2014-10-08

Nicely done. Thanks for sharing this!

About This Instructable

328views

1favorite

License:

Bio: Mechanical engineer, alumnus Colorado State University, and member of Alamance Makers Guild.
More by Porda:3D Print an ImagePorda Tri-SpinnerPorda Tri-Spinner
Add instructable to: